Thanks for purchasing our Disco light projector.When you turn it on, a wonderful and beautiful night sky shows on.The stars are constantly moving and morphing,It’s with stroboflash function and brings you to enter into a amazing and fantastic world.when operate it ,please read this manual carefully.
Video:http://v.youku.com/v_show/id_XNTM0NTU2OTY0.html
Packing List:
1.1pcs projector; 2.1pcs AC adaptor; 3.1pcs manual;
Specification:
1.AC adaptor : input AC 110-240V , output: 12V/1A
2.Green laser wavelength: 532nm（±5nm）Red Laser wavelength: 650nm （±10nm）
3.Output power: 5-100mw
4.Laser Hazard Classes: CLASS Ⅲ B
5.Dimension: 142*120*68(mm)
6.N.W.: 900g
Notice and Warning:
1.This is laser product, which grade is Class Ⅲ B, so please avoid to shot eyes directly.
2.Please do not allow children under 12 to operate this projector;
3.This unit is only used for indoor,application Disco, Clubs, KTV, Party, Bar ,and so on.
4.Please should be prevented from dust,moisture and shake.
5. Operating voltage is AC110-240V/ 50-60HZ .Don’t exceeded the range.
6. Please keep continually working less than 8hours .
The projecting program as below:
AUTO:Turn on/red&green line -> red &green dot -> red&green line stroboflash->green line & red line -> red&green dot stroboflash -> green dot -> red dot -> recycle (see figure 1 Auto1&Disco2)
DISO: Turn on/red&green line stroboflash -> red &green dot stroboflash -> recycle (see figure 1 Auto1&Disco2)
NOTE: Each projecting program needs 15 seconds (see figure 1 DC Scoket 3)
|
